HY series intelligent combined anti-harmonic low voltage power capacitor is a new integrated module for reactive power compensation. which is applied in 0.4kV low voltage distribution network to save energy, harmonic mitigation and improve power factor, instead of the traditional reactive power compensation equipment composed of controller, fuse, switch, filter reactor and power capacitor.
It is mainly designed for the situation where the power network has a high harmonic and the traditional capacitors cannot be operated. It can not only meet the reactive power compensation, improve the power factor, but also restrain the influence of the corresponding harmonic on the capacitor and improve the power quality.
In the electrical environment where the main harmonic is 5 times or more, 7% of reactors shall be equipped, and the main harmonic is 3 times or more, 14% of reactors shall be equipped.
| HY | B | A | - | □ | K | - | □□ | - | A | / | □ | / | □ | / | □ |
| | | | | | | | | | | | | | | | | | | | | ||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| No. | Name |
Meaning |
| 1 | Enterprise code | HY |
| 2 | Design No. | B |
| 3 | Automatic control | A |
| 4 | Compensation method | F: split phase compensation; G: three phase compensation |
| 5 | anti-harmonic | K |
| 6 | Procedure category | three phase compensation: 525/480. split phase compensation: 300/280 |
| 7 | box type | No mark: vertical type |
| 8 | Capacitor rated voltage(V) | |
| 9 | Rated capacity(kvar) | |
| 10 | Reactance ratio(%) | 7%/14% |
*Note: HYBAGK series products must be equipped with JKGHYBA580-1 reactive power compensation measurement and control device
| Normal working and installation conditions | |
| Ambient temperature | -25°C ~ +55°C |
| Relative humidity | Relative humidity ≤ 50% at 40°C ; ≤ 90% at 20°C |
| Altitude | ≤ 2000m |
| Environmental conditions | no harmful gas and steam, no conductive or explosive dust, no severe mechanical vibration |
| Power condition | |
| Rated voltage | 380V±20% |
| Rated frequency | 50Hz (45Hz ~ 55Hz) |
| THDv | THDv ≤ 5% |
| THDi | THDi ≤ 20% |
| Performance | |
| Measurement tolerance | Voltage: ≤ ±0.5%(0.8~1.2Un), current: ≤ ±0.5%(0.2~1.2ln)/ active power: ≤ ±2%, power factor: ≤ ±1%, temperature:±1°C |
| Protection tolerance | Voltage: ≤ ±1%z current: ≤ ±1%, temperature: ±1°C time:±0.1s |
| Reactive compensation parameters | Reactive power compensation tolerance: ≤ 50% of the min. capacitor capacity, capacitor switching time: ≥ 10s, can be set between 10s and 180s |
| Reliability parameter | Control accuracy: 100%, allowable switching times: 1 million times, capacitor capacity running time attenuation rate: ≤ 1% / year, capacitor capacity switching attenuation rate: ≤ 0.1 % / 10,000 times |
| Protective function | Over-voltage protection, under-voltage protection, short-circuit protection, over-current protection, over-harmonic protection, over-temperature protection, drive failure protection |
| Standard | GB/T15576-2008 |
| Communication monitoring capability | |
| Communication interface | RS485 |
| Communication protocol | Modbus protocol / DL645 |
HYBAGK/HYBAFK(5-40)kvar
| Compensation method | Specification | Capacitor rated | Reactance ratio | Rated capacity (kvar) | Dimension (WxHxD) | Mounting dimension (WIxDI) |
| three phase compensation | 480/40/7% | 480/525 | 7%/14% | 40 |
150x533x407 |
100x515 |
| 480/30/7% | 480/525 | 7%/14% |
30 |
150x533x407 |
100x515 |
|
| 480/20/7% | 480/525 | 7%/14% |
20 |
150x533x357 |
100x515 |
|
| 480/10/7% | 480/525 | 7%/14% |
10 |
150x533x357 |
100x515 |
|
| 280/30/7% |
280/300 |
7%/14% |
30 |
150x533x407 |
100x515 |
|
| 280/25/7% |
280/300 |
7%/14% |
25 |
150x533x357 |
100x515 |
|
| split phase | 280/20/7% |
280/300 |
7%/14% |
20 |
150x533x407 |
100x515 |
| compensation | 280/15/7% |
280/300 |
7%/14% |
15 |
150x533x357 |
100x515 |
| 280/10/7% |
280/300 |
7%/14% |
10 |
150x533x357 |
100x515 |
|
| 280/5/7% |
280/300 |
7%/14% |
5 |
150x533x357 |
100x515 |
HYBAGK-A box type (40-70)kvar
| Compensation method | Specification | Capacitor rated voltage(V) | Reactance ratio | Rated capacity (kvar) | Dimension (WxHxD) | Mounting dimension (WlxDl) |
| three phase compensation | 480/70/7% | 480/525 | 7%/14% | 70 | 270x482x430 | 175x465 |
| 480/60/7% | 480/525 | 7%/14% | 60 | 270x482x430 | 175x465 | |
| 480/50/7% | 480/525 | 7%/14% | 50 | 270x482x430 | 175x465 | |
| *e.g.: HYBAGK □□ - A/ 480 / 40 / 7%, □□ - is a customized program category, - A is box type, with two steps inside | ||||||
HYBAGK Drawer type 100kvar Module
| Compensation method | Specification | Capacitor rated voltage(V) | Reactance ratio | Rated capacity(kvar) | Dimension(WxHxD) |
| three phase compensation | 480/100/7% | 480/525 | 7%/14% | 100 | 555x278x626 |
*Note: installation dimension w1xd1: 530x300 or 526(W)x220(H).
The user must provide the product's rated voltage, rated capacity, three phase compensation or split phase compensation, etc.
Users try to provide some characteristics of the place of use
